INDIGENOUS EXPERTISE. INDUSTRIAL REACH. PORT HARCOURT, NG +234 803 743 8916
ZOMIKRESOURCES NIGERIA LIMITED

Industrial Procurement / Trans Amadi Yard

Industrial Sourcing.
OEM Technical Supplies.
Certified Procurement.

Authorized Swagelok instrumentation, Cooper B-Line cable trays, explosion-proof enclosures, valves, and heavy pipeline fittings.

Staged and inspected at our 11 Trans Amadi Bakana Yard and corporate warehouse in Port Harcourt. Rapid mobilization, mill test certificates, and full OEM warranty compliance.

Inspect yard inventory Submit RFQ list
REAL WAREHOUSE INVENTORY • MILL TEST CERTIFIED • PORT HARCOURT
FIELD OF VIEWWAREHOUSE & YARD STOCK
Warehouse inventory of industrial ball valves, flanged pipeline fittings and cable trays
Inventory spotlight Ball valves, pipe fittings & cable trays.
Stock: 11+ Categories 100% Genuine OEM 02 Trans Amadi Facilities Mill Test: EN 10204 3.1
Jump to Physical Inventory Section:
01 4 Units
Cable Ladders & Bends View inventory ↓
02 2 Units
Swagelok & Instrumentation View inventory ↓
03 2 Units
Hazardous Area & Enclosures View inventory ↓
04 3 Units
Piping, Valves & Fasteners View inventory ↓

01 / Physical Yard Inventory

Cable Trays, Ladders & Support Systems

Heavy-duty galvanized and stainless steel cable ladders, factory-curved 90° horizontal bends, vertical risers, and structural splice plates staged in yard storage.

4 Units Staged 11 Trans Amadi Bakana Yard / Indoor & Ground Staging
INV-01 In Stock / Staged Cooper B-Line Cable Ladders & 90° Horizontal Bends
Cable Trays & Ladders 11 Trans Amadi Bakana Yard / Indoor Storage

Cooper B-Line Cable Ladders & 90° Horizontal Bends

Heavy-duty galvanized and stainless cable ladders with factory 90-degree curved horizontal elbows

High-capacity structural cable ladder system engineered for offshore drillships, marine platforms, and refinery switchgear rooms. Features welded rungs and pre-drilled side rail flanges for rapid bolt-together assembly, vibration resistance, and maximum heat dissipation for high-voltage power feeds.

Material: Hot-Dip Galvanized / 316 Stainless Steel
Form Factor: Straight Sections & 90° Horizontal Bends
Rung Spacing: 9-inch & 12-inch Welded Ladder Rungs
Standards: NEMA VE1 / CSA C22.2 / Cooper B-Line OEM
Application: Offshore Platforms, Heavy Refineries, MCCs
Cooper B-Line NEMA VE1 HDG Steel Cable Ladder 90° Elbows
Quote item
INV-02 Factory Sealed / Ready for Dispatch Packaged Cable Tray Riser Bends & Palletized Fittings
Cable Trays & Ladders Trans Amadi Staging & Dispatch Bay

Packaged Cable Tray Riser Bends & Palletized Fittings

Shrink-wrapped pallets of factory-formed vertical and horizontal cable ladder elbow fittings

Precision-engineered curved cable tray transitions, vertical inside/outside riser bends, and horizontal fittings palletized under heavy-duty weather-resistant shrink wrap. Staged with factory warning tags and QA inspection badges ready for immediate offshore logistics dispatch.

Material: Pre-Galvanized & Marine-Grade Stainless
Packaging: Industrial Shrink Wrap on Heat-Treated Pallets
Fitting Type: Vertical Inside/Outside Bends & Reducers
Protection: Moisture & Corrosion Resistant Wrapping
Application: Offshore Vessel Mobilization, Marine Cable Runs
Palletized Stock Riser Bends Weather-Wrapped Offshore Staged
Quote item
INV-03 In Stock / Staged Galvanized Straight Cable Ladder Racks with Splice Plates
Cable Trays & Ladders Bakana Yard Heavy Storage Facility

Galvanized Straight Cable Ladder Racks with Splice Plates

Upright staged structural cable ladder sections showing slotted rungs and precision connector plates

Heavy-gauge galvanized straight cable ladder sections designed with regularly slotted rungs for versatile cable cleating and strapping. Side rails feature standard bolt patterns for splice plate coupling, ensuring electrical ground continuity and rigid structural alignment across long overhead spans.

Material: Hot-Dip Galvanized Structural Steel
Side Rail: 4-inch & 6-inch Heavy Industrial Depth
Connection: Bolted Splice Plates with Bonding Jumper
Load Rating: NEMA 12C / 20C Heavy Industrial Loading
Application: Overhead Pipe Racks, Industrial Switchyards
Structural Galvanized Splice Connectors Slotted Rungs Heavy Duty
Quote item
INV-04 Available for Delivery Long-Span Heavy Cable Ladder Runs — Yard Staging
Cable Trays & Ladders 11 Trans Amadi Bakana Yard / Ground Staging

Long-Span Heavy Cable Ladder Runs — Yard Staging

Full-length heavy-duty aluminum and galvanized straight cable ladders staged on yard pavement

Full 3.0 m and 6.0 m straight industrial cable ladder sections laid out and staged for batch inspection, bundling, and client dispatch. Engineered to withstand Niger Delta coastal humidity while providing support for high-amperage armored power feeds.

Material: Marine Extruded Aluminum / HDG Steel
Standard Length: 3.0 m & 6.0 m Standard Industrial Lengths
Rung Design: Welded Hollow Tubing with Tie-Down Slots
QC Status: Dimension Verified & Surface Inspected
Application: Cross-Country Pipeline Corridors, LNG Plants
3m & 6m Spans Yard Staging Aluminum / Steel Rapid Mobilization
Quote item

02 / Physical Yard Inventory

Swagelok Tubing & Heavy Armored Cables

Genuine Swagelok PVC-jacketed 316/316L instrumentation coils and continuous-run armored control and multi-tube bundles on heavy timber reels.

2 Units Staged Port Harcourt Climate-Controlled Warehouse & Spool Yard
INV-05 Certified OEM Stock Swagelok 316/316L PVC-Jacketed Stainless Tubing Coil
Swagelok & Instrumentation Port Harcourt Climate-Controlled Warehouse

Swagelok 316/316L PVC-Jacketed Stainless Tubing Coil

Genuine Swagelok seamless stainless instrumentation tubing with protective thermoplastic PVC jacket

Genuine Swagelok seamless coiled instrumentation tubing manufactured to ASTM A269/A213 in 316/316L stainless steel. Encased in a heavy-duty extruded thermoplastic PVC jacket (250°F / 120°C rated) with continuous heat trace batch identification (Heat 806154 / Batch 302023) for extreme corrosive offshore service.

OEM / Brand: Genuine Swagelok (swagelok.com verified)
Alloy Grade: 316 / 316L Seamless Stainless Steel
Standard: ASTM A269 / ASTM A213 / ASME SA213
Traceability: Heat 806154, Batch 302023, 250°F / 120°C
Application: Wellhead Control, Chemical Injection, Sampling
Swagelok OEM 316L Stainless PVC Jacketed ASTM A269 Heat 806154
Quote item
INV-06 Continuous Lengths Available Armored Industrial Cables & Multi-Tube Bundles on Reels
Swagelok & Instrumentation Trans Amadi Cable Spool Yard

Armored Industrial Cables & Multi-Tube Bundles on Reels

Heavy industrial armored power, control, and multi-core instrumentation tubing wound on timber reels

High-capacity wooden reels containing continuous lengths of interlocked corrugated aluminum/steel armored industrial cables and pneumatic/hydraulic multi-tube bundles. Built for direct burial, cable tray installation, and harsh offshore marine pulls requiring maximum mechanical crush protection.

Armoring: Interlocked Metal Armor with Polymer Outer Jacket
Spool Format: Heavy-Duty Industrial Timber Reels (Reel 1206)
Conductors: Multi-Conductor Control & Instrumentation Bundle
Voltage / Rating: 600V / 1000V Marine & Oilfield Certified
Application: Subsea Umbilical Interface, Refinery Power Feeds
Armored Cable Heavy Spools Multi-Core Crush Resistant
Quote item

03 / Physical Yard Inventory

Hazardous Area Enclosures & Conduit Fittings

ATEX & IECEx certified Ex d flameproof cast aluminum terminal enclosures, genuine factory-boxed Klinger gaskets, and Myers Scru-Tite insulated grounding hubs.

2 Units Staged 11 Trans Amadi Warehouse / Bay 2 & Electrical Storage
INV-07 In Stock / Certified Explosion-Proof Terminal Enclosures & Klinger Gaskets
Hazardous Area & Enclosures 11 Trans Amadi Warehouse / Bay 2

Explosion-Proof Terminal Enclosures & Klinger Gaskets

Heavy-duty cast aluminum flameproof junction enclosures staged with genuine Klinger sealing gaskets

ATEX and IECEx certified explosion-proof cast aluminum terminal boxes and junction enclosures staged under protective shrink wrap on timber skids. Accompanied by genuine factory-boxed Klinger high-temperature, high-pressure industrial sealing gaskets for guaranteed leak-free flanged pipe installations.

Enclosure: Copper-Free Cast Aluminum Alloy (Ex d Flameproof)
Protection: IP66 / IP67 Weatherproof, Zone 1 & 2 ATEX / IECEx
Gasket OEM: Klinger (Compressed Fiber & Spiral Wound)
Hardware: Stainless Steel External Fasteners & Hinges
Application: Offshore Drilling Rigs, FPSO Units, Gas Plants
Explosion-Proof Ex d / IP66 Klinger Gaskets ATEX Certified
Quote item
INV-08 Bulk Inventory In Stock Myers Scru-Tite Insulated Grounding Conduit Hubs
Hazardous Area & Enclosures Trans Amadi Electrical Fittings Inventory

Myers Scru-Tite Insulated Grounding Conduit Hubs

Genuine Myers Scru-Tite conduit hubs with red insulated throat liners and integral grounding screws

Precision-cast Myers Scru-Tite conduit grounding hubs engineered for terminating rigid industrial conduit into electrical enclosures. Equipped with vibration-proof grounding screws and vibrant red insulated throat liners that protect cable jackets against pulling abrasion in hazardous locations.

Brand: Myers (Eaton Crouse-Hinds / Scru-Tite Series)
Construction: Precision Die-Cast Zinc / Aluminum Alloy
Special Features: Insulated Red Throat Liner, Bonding Ground Screw
Sealing Rating: NEMA 3R, 4, 4X, 12 Raintight & Dust-Tight
Application: Motor Control Centers, Junction Enclosures, Skids
Myers Hubs Scru-Tite Grounding Hub Hazardous Location
Quote item

04 / Physical Yard Inventory

Piping Packages, Valves, Flanges & Fasteners

Hydro-tested API 6D ball valves, ASME B16.9 butt-weld fittings, ASTM A105 forged steel flanges, and ASTM A193 B7 / A194 2H coated stud bolts.

3 Units Staged Trans Amadi Warehouse Racks Bay 3 & Shelf B-12
INV-09 Comprehensive Warehouse Stock Industrial Ball Valves, Flanged Valves & Pipeline Flanges
Piping, Valves & Fasteners Trans Amadi Warehouse Racks Bay 3

Industrial Ball Valves, Flanged Valves & Pipeline Flanges

Warehouse inventory shelving stocked with brass ball valves, ANSI flanged valves, and forged steel flanges

Heavy multi-tier inventory of quarter-turn lever-operated brass ball valves, ANSI Class 150/300 flanged steel ball valves, control valves, and companion forged steel weld-neck flanges. Every valve includes hydro-testing certificates, blow-out proof stems, and PTFE fire-safe seats.

Valve Styles: Lever Brass Ball Valves, Flanged ANSI 150/300 Valves
Flange Types: Weld-Neck, Slip-On, Blind Flanges (ASME B16.5)
Pressure Class: Class 150, Class 300, Class 600 WOG
Testing Standard: API 6D / API 598 Hydrostatic & Seat Tested
Application: Oil & Gas Manifolds, Flowstations, Process Piping
Ball Valves ANSI 150/300 API 6D Forged Flanges Warehouse Stock
Quote item
INV-10 Ready for Immediate Dispatch Carbon Steel Butt-Weld Fittings & Heavy Pipe Flanges
Piping, Valves & Fasteners Trans Amadi Warehouse Shelf B-12

Carbon Steel Butt-Weld Fittings & Heavy Pipe Flanges

Warehouse inventory of carbon steel butt-weld 90°/45° elbows, tees, and forged weld-neck flanges

Heavy-wall seamless butt-weld pipe fittings including long-radius 90° elbows, 45° elbows, concentric reducers, equal tees, and companion forged carbon steel flanges. Precision beveled to ASME B16.9 and ASTM A234 WPB specifications for high-pressure welded piping networks.

Fitting Standard: ASME B16.9 / ASTM A234 WPB / MSS-SP-75
Wall Thickness: Schedule 40, Schedule 80, Schedule 160, XS
Flange Material: ASTM A105 Forged Carbon Steel (ASME B16.5)
Material Certs: Full EN 10204 3.1 Mill Test Reports (MTR)
Application: High-Pressure Transmission, Header Manifolds
Butt-Weld ASTM A234 WPB ASME B16.9 Forged Flanges Schedule 40/80
Quote item
INV-11 Extensive Inventory on Racks High-Tensile Pipeline Stud Bolts & Heavy Hex Nuts
Piping, Valves & Fasteners Trans Amadi Fasteners Storage Bay

High-Tensile Pipeline Stud Bolts & Heavy Hex Nuts

Heavy hex stud bolts and nuts with protective coatings organized in warehouse inventory racks

High-tensile continuous-thread alloy steel stud bolts and matching heavy hex nuts conforming to ASTM A193 Grade B7 and ASTM A194 Grade 2H. Available with cadmium plating, hot-dip galvanizing, and PTFE blue fluoropolymer coatings for subsea and corrosive offshore flange connections.

Grades: ASTM A193 B7 / B7M & ASTM A194 2H / 2HM
Thread Series: UNC & 8-UN Thread Series, Class 2A / 2B
Coatings: PTFE Xylan / Cadmium Plated / Hot-Dip Galvanized
Traceability: Heat Code Stamped with Manufacturer Head Marks
Application: High-Pressure Flange Bolting, Valve Bonnets, Vessels
ASTM A193 B7 Heavy Hex Nuts PTFE Coated Pipeline Fasteners
Quote item

05 / OEM Strategic Supply Chain

Direct Manufacturer Partnerships

We bypass unauthorized brokers through direct OEM agreements, guaranteeing factory warranties, authentic certification, and rapid delivery.

Swagelok stainless tubing coil
Swagelok tube fittings and valves

Swagelok Instrumentation

Authorized partner for Swagelok stainless steel instrumentation fittings, valves, manifolds, PVC jacketed coiled tubing, and compression components for extreme oilfield pressures.
Cooper B-Line cable ladders
Packaged cable tray bends

Cooper B-Line (Eaton) Cable Systems

Complete cable management systems including heavy-duty galvanized cable ladders, 90° bends, vertical risers, slotted strut channels, and engineered cable clamping hardware.
Explosion-proof enclosures and Klinger gaskets
Myers grounding conduit hubs

Hazardous Area Enclosures, Myers Hubs & Klinger Gaskets

ATEX/IECEx explosion-proof cast aluminum terminal boxes, Myers Scru-Tite insulated ground conduit hubs, and genuine Klinger high-temperature spiral wound sealing gaskets.
Industrial valves and flanges inventory
High-tensile stud bolts and nuts

Piping Packages, Valves, Flanges & Fasteners

API 6D ball valves, ASME B16.5 flanges, ASTM A234 WPB butt-weld fittings, and ASTM A193 B7 / A194 2H high-tensile pipeline stud bolts with protective PTFE coatings.
Coated pipeline inventory stacked with inspection tags
TRACEABILITY / MATERIAL TEST CERTIFICATION

06 / Quality Assurance & Compliance

Full Traceability.
Zero Compromise.

Every item dispatched from our Trans Amadi yards conforms to strict international quality standards.

We supply complete documentation packages with every consignment, including EN 10204 Type 3.1 Mill Test Certificates (MTRs), Positive Material Identification (PMI) inspection reports, hydrostatic pressure test charts, and manufacturer certificates of conformity.

Our solid financial standing enables bulk procurement and staging in Port Harcourt, insulating our clients from supply chain disruptions, long OEM lead times, and foreign exchange volatility.

Discuss bulk procurement terms

Ready for mobilization

Require specific equipment, fittings or materials?

Send your bill of quantities or equipment specification sheet. Our procurement engineering team in Trans Amadi will provide immediate availability, pricing, and mobilization schedules.

Submit RFQ bill of materials